Polaris RZR Odyssey 925 Battery Install Kit Instructions

Published on May th, 2009

Name: Polaris RZR Odyssey PC925 Install Kit
Part No: ATR-ELE-1001

Parts Included In Kit:

  • Alloy Bracket w/ Foam Pad
  • 2 Brass Spacers
  • 2 6mm Flange Bolts
  • 2 6MM Lock Washers
  • 2 1/4-20-1.25″ SS Allen Machine Screws
  • Battery Tender Harness
  • Zip tie

Tools Required For Installation:

  • Basic Hand Tools
  • 1/4-20 Tap

Installation Procedure:

Step 1:
Please verify that all the parts are present. Read the directions completely before proceeding with the installation. If you have any questions, feel free to give us a call or email.

Step 2:
Remove the old battery from its compartment. Run your tap thru the original hold down holes as a preventive measure. You may have to loosen the console and push it to the side. Start to install the battery on its side with terminals facing toward the cables. Install the brass spacers with counter bore facing the battery. Using supplied hardware, install the cables and battery tender harness and place battery down into its holder. Install billet hold down using SS machined screws and tighten down. Secure trickle charger harness with the zip tie.


Comment guidelines, edit this message in your Wordpress admin panel