Posted on 03 May 2010 by admin
It seems every week I’m able to experience something new for the first time and it’s usually something I never dreamed I’d get to experience. My first month in California I attended the Baja 1000 with Wes and the entire Matlock Racing team. I got to ride Ocotillo Wells with Mike Metzger and some of his crew for an event he was putting on. Most recently I was able to be involved in my first magazine shootout between several very built race quads.
Posted on 11 May 2009 by admin
Name: Polaris RZR Odyssey PC925 Install Kit
Part No: ATR-ELE-1001
Parts Included In Kit:
Tools Required For Installation:
Installation Procedure:
Step 1:
Please verify that all the parts are present. Read the directions completely before proceeding with the installation. If you have any questions, feel free to give us a call or email.
Posted on 17 January 2009 by Larry Davis
We seem to have an unquenchable thirst for the latest and greatest hard parts in our 4wd industry. We all want that set of killer axles, transfer case, engine, tires or newest widget that will make our rig ‘bombproof’ on the trail while with our buddies. We don’t want to be the one everyone waits on while we fix our junk on the trail, right?
Posted on 06 January 2009 by admin
Our Polaris RZR Chassis Bones sleeve the RZR’s chassis tubes and increase their thickness by 130% These not only greatly increase the strength of your RZR’s chassis but they also feature a machined end piece with a rubber o-ring that keep out mud and water. All pieces come in a Zinc Chromate finish to resist corrosion.
Tools Required For Installation:
Hand Tools
Electric or Cordless Drill
T25 Torx® Bit
3/8” Allen® Bit
Torque Wrench
Wheel Bearing Grease
Parts Included In Kit:
2 Long Tube Inserts
Posted on 06 January 2009 by admin
Our Steering Column Kit uses machined sleeves and needle bearings that take out all of the slop found with the RZR’s factory steering column.
.
Posted on 17 December 2008 by admin
Polaris RZR Chassis Legs replace the rear lower A arm bolts with one long grade 8 bolt, and uses a machined spacer to brace the 2 lower A arm mounts together. For those who can break a battleship with a rubber hammer, this kit helps add to the strength of the rear of your chassis and suspension. Utilized with our Chassis Bones and Frame Plates you can transform your stock RZR chassis into a bulletproof platform. Bolts and machined spacer come in a Black Oxide finish.
Posted on 17 December 2008 by admin
Name: Yamaha Rhino Front Chassis Plate
Part No: ATR-CHA-2001
Parts Included In Kit:
1 Chassis Plate
1 8mm Differential Flange Bolt
5 ¼” Washer
4 10mm 10.9 A-Arm Flange Bolt
4 10mm Lock Nut
Tools Required For Installation:
Basic Hand Tools
Installation Procedure:
Step 1:
Please verify that all the parts are present. Read the directions completely before proceeding with the installation. If you have any questions, feel free to give us a call or email.
